# SBA loans for metal coating shops

**Short answer:** SBA approved 61 loans to metal coating shops since October 2023, with a median of $150,000. Half of the loans were between $60,000 and $500,000. Source: SBA 7(a) loan file, June 30, 2026.

Canonical page: https://www.sbaexpress.loans/industries/metal-coating-engraving-allied-services-to-manufacturers/
Data as of: 2026-06-30

These figures come from SBA's public loan file for the 7(a) program, which includes SBA Express. They cover NAICS 332812, Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers. The loans were approved from October 1, 2023 to June 30, 2026. The file lists approvals only, so it shows what lenders funded, not who applied or who was turned down.

## What lenders check

Each lender sets its own checklist. SBA sets the basic eligibility tests.

A lender reviewing a loan to metal coating shops looks at the business's numbers and these items for the trade:

- Air and wastewater permits for coating operations, and the hazardous waste records behind them
- Environmental review of the site, since coating lines can leave contamination that affects the building's value
- Oven and booth capacity, how busy it runs, and whether work comes from many fabricators or a few large ones

What SBA sets and what the lender sets

Under SOP 50 10 8.1, SBA sets no minimum credit score; the lender applies its own credit standards. To qualify, a business must be an operating, for-profit business located in the United States that is small under SBA size standards and can show a need for the credit. Source: SOP 50 10 8.1: Sec. B, Ch. 2, Para. C.2; SBA Procedural Notice 5000-876777; 13 CFR § 120.100.

## Common uses of the money

Businesses like these use SBA loans for:

- Powder-coating line with pretreatment washer, booth and cure oven
- Larger ovens to take on oversized parts
- Blast cabinet or blast room for surface preparation before coating

## The cash cycle

Customers deliver parts and the shop invoices when coating is done, typically on net terms. Powder, chemicals and gas for the ovens are paid as work runs, so one slow-paying fabricator can leave the shop short of cash.

## Collateral

Collateral is usually the coating line, ovens and booths, which are costly to move, plus the building when owned, subject to environmental findings.

SBA collateral and guarantee rules

On an SBA Express loan of $50,000 or less, collateral is not required. Above that, the lender may use its own collateral policies for similar non-SBA loans. Under SOP 50 10 8.1, a loan request must not be declined solely because collateral is inadequate.

Every owner of 20% or more of the business must give an unlimited personal guarantee. Source: SOP 50 10 8.1: App. 19, Para. B.3; App. 19, Para. A (p. 404); Sec. A, Ch. 5, Para. A.1 (p. 93); 13 CFR § 120.160(a).

## How much they borrow

Half of these loans were between $60,000 and $500,000.

Share of 61 loans by size, Oct 2023 to Jun 2026

- $50,000 or less: 25%
- $50,001 to $150,000: 26%
- $150,001 to $350,000: 16%
- $350,001 to $500,000: 8.2%
- $500,001 to $1,000,000: 8.2%
- $1,000,001 to $2,000,000: 9.8%
- Over $2,000,000: Fewer than 5

Bars show each band's share of the loans. Fewer than 5 marks a band whose count we do not publish.

The median loan was $150,000, close to the $150,300 median for all SBA 7(a) loans. Half of the loans fell between $60,000 and $500,000. The most common size band was $50,001 to $150,000.

By business age, 66% had operated for more than 2 years and 15% for 2 years or less. 15% paid for a change of ownership.

## What they paid

The median loan priced at Prime plus 2.75 percentage points, the same as the median for all SBA 7(a) loans.

9.99%: Median rate at approval

Prime + 2.75: Median spread over Prime

Prime + 2.75: All industries, median spread

The median rate at approval was 9.99% on loans approved October 1, 2023 to June 30, 2026. Rates in SBA's file are the initial rates when the loans were approved. On a variable-rate loan the rate then moves with Prime, so these are not today's rates.

SBA's maximum rate today

SBA caps a variable rate by loan size. For a loan of $50,001 to $250,000, the cap is Prime plus 6.0 percentage points. The typical loan here, $150,000, is in that range. With Prime at 7.00% as of Nov 10, 2026, the maximum is 13.00% today. Source: SOP 50 10 8.1: App. 18, Para. A.2 (p. 395); 13 CFR § 120.214(d)(2).

## How the money comes

41% of the loans went through SBA Express and 34% were lines of credit. The median term was 10 years.

41.0%: Through SBA Express

34.4%: Lines of credit

10 years: Median term

Across all industries, 36% of loans went through SBA Express and 28% were lines of credit. Express counts here include Export Express.

SBA Express in brief

An SBA Express loan can be as large as $500,000, and SBA guarantees 50% of it. On an Express loan, the lender makes the credit decision without prior SBA review. SBA's procedures also say only a lender with SBA Express authority can make one. An SBA Express line of credit can run 10 years, including any term-out period. Source: SOP 50 10 8.1: Sec. B, Ch. 2, Para. B.1 (p. 126); App. 16, Para. B.2; Sec. B, Ch. 2, Para. C.2; Sec. B, Ch. 2 (p. 125); App. 17, Para. B.3.

The median term was 10 years (120 months). For working capital, SBA's maximum term is 10 years. For equipment, it is 10 years, or up to 15 years if the IRS asset class useful life supports it. Source: SOP 50 10 8.1: App. 17, Para. A.1 (p. 390); App. 17, Para. A.2 (p. 390).

Fee waiver for manufacturers

For loans approved October 1, 2026 through September 30, 2027, the upfront guaranty fee is 0% for loans of $700,000 or less to manufacturers (NAICS 31-33), listed food supply chain businesses and businesses in rural areas. Source: SBA Information Notice 5000-881797, p. 1 (Sept. 3, 2026).

## Who lends

The Huntington National Bank made the most loans from October 2019 to June 2026, 13 of 152 (8.6%).

**Largest lenders by loans, Oct 2019 to Jun 2026**

| Lender | Type | Loans | Share of loans |
| --- | --- | --- | --- |
| [The Huntington National Bank](https://www.sbaexpress.loans/sba-express-lenders/the-huntington-national-bank/) | Bank | 13 | 8.6% |
| [Newtek Bank](https://www.sbaexpress.loans/sba-express-lenders/newtek-bank/) | Bank | 9 | 5.9% |
| [U.S. Bank](https://www.sbaexpress.loans/sba-express-lenders/u-s-bank/) | Bank | 8 | 5.3% |
| [Live Oak Banking Company](https://www.sbaexpress.loans/sba-express-lenders/live-oak-banking-company/) | Bank | 6 | 3.9% |
| [TD Bank](https://www.sbaexpress.loans/sba-express-lenders/td-bank/) | Bank | 6 | 3.9% |

Lenders are ranked by loans and listed only when they made 5 or more. Janover Capital LLC does not represent these lenders, and a lender's past loans do not describe its current credit policy.

See every lender on the [SBA Express lenders](https://www.sbaexpress.loans/sba-express-lenders/) page.

## Where the loans are

California had the most loans, 11 of 61 (18%).

**Top states by loans, Oct 2023 to Jun 2026**

| State | Loans | Share of loans |
| --- | --- | --- |
| [California](https://www.sbaexpress.loans/california-small-business-loans/) | 11 | 18.0% |
| [Florida](https://www.sbaexpress.loans/florida-small-business-loans/) | 7 | 11.5% |
| [New York](https://www.sbaexpress.loans/new-york-small-business-loans/) | 5 | 8.2% |

Location is the state of the business, not of the lender.

Compare every state on [SBA loans by state](https://www.sbaexpress.loans/sba-loans-by-state/).

## How often these loans went bad

Fewer than 5 of 74 seasoned loans were charged off, against 3.6% of all SBA 7(a) loans.

74: Seasoned loans

Fewer than 5: Charged off

3.6%: All industries, by loans

Fewer than 5 of the 74 loans approved October 1, 2019 to September 30, 2022 were charged off by June 30, 2026. We show no rate, because a rate beside a group of known size would give the count away.

How we measure this

A seasoned loan is one approved October 1, 2019 to September 30, 2022. Newer loans have not had time to go bad, so they are left out. Charged off means the lender wrote the loan off as a loss, shown as status CHGOFF in SBA's file on June 30, 2026. The rate is charged-off loans divided by seasoned loans. This describes what happened to approved loans. It says nothing about whether an application will be approved.

## SBA size standard

NAICS 332812 has its own size standard.

For NAICS 332812, SBA's size standard is 600 employees. A business at or under the standard is small for SBA's purposes. To qualify, a business must fit the size standard for the applicant's primary industry in 13 CFR 121.201, measured in annual receipts or employees. SBA measures size on the date the application is accepted for SBA processing, or for delegated loans the date the lender approves the loan.

A business over the standard can still qualify under the alternative standard: tangible net worth of $20 million or less and average net income after federal income taxes of $6.5 million or less over the prior two fiscal years. Source: SOP 50 10 8.1: Sec. A, Ch. 1, Para. D.1 (p. 14); Sec. A, Ch. 1, Para. D.2 (p. 14); 13 CFR § 121.301(b)(2).

Check the code before you rely on it

SBA proposed new size standards for 338 industry groups and industries on August 20, 2026; the change is proposed only. Source: 91 FR 53741 (Aug. 20, 2026).

## A payment example

**Payment on a typical loan**

| Item | Example |
| --- | --- |
| Loan amount | $150,000, the median |
| Term | 10 years (120 months), the median |
| Rate | 9.99%, the median at approval |
| Monthly payment | $1,981 |
| Total interest over the term | $87,772 |

The example uses the median loan and the median term. The rate is the median at approval for these businesses. It covers principal and interest only, and it assumes the loan runs the full term. It leaves out fees, including the SBA guaranty fee.

On a variable-rate loan, a 1 percentage point move in Prime changes this payment by about $84 a month. Prime is 7.00% as of Nov 10, 2026. For a payment at today's rate, use the [SBA Express payment calculator](https://www.sbaexpress.loans/sba-express-payment-calculator/).

How to read this

Counts come from SBA's 7(a) loan-level data release, as of June 30, 2026. The file lists loans SBA approved. It does not list declined applications, so it cannot show approval odds. We do not publish any figure built on fewer than 5 loans. Industry is the NAICS code recorded on each loan. This page covers NAICS 332812, Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers. Express share counts SBA Express and Export Express loans. Lines of credit are loans the file marks as revolving. The median rate is the initial rate on loans with a rate on file. The spread is that rate minus Prime on the approval date, for variable-rate loans only. [How we build these pages](https://www.sbaexpress.loans/method/).

## Sources

- [SBA 7(a) loan file, June 30, 2026](https://data.sba.gov/dataset/7a-504-foia)
- [SOP 50 10 8.1: App. 19, Para. A (p. 404); Sec. B, Ch. 2, Para. C.2 (Para. C begins p. 127); App. 19, Para. B.3 (Para. B begins p. 408); App. 16, Para. B.2 (Para. B begins p. 388); Sec. B, Ch. 2 (p. 125); App. 17, Para. B.3 (Para. B begins p. 391); Sec. B, Ch. 2, Para. B.1 (p. 126); Sec. A, Ch. 5, Para. A.1 (p. 93); Sec. A, Ch. 1, Para. D.1 (p. 14); Sec. A, Ch. 1, Para. D.2 (p. 14); App. 17, Para. A.2 (p. 390); App. 17, Para. A.1 (p. 390); SBA Procedural Notice 5000-876777; 13 CFR § 120.160(a); 13 CFR § 121.301](https://legacy.sba.gov/sites/default/files/2026-10/SOP%2050%2010%208.1%20Technical%20Policy%20Updates%20effective%20%2010.1.2026.docx)
- [13 CFR § 120.100](https://www.ecfr.gov/current/title-13/section-120.100)
- [SBA Information Notice 5000-881797, p. 1 (Sept. 3, 2026)](https://legacy.sba.gov/document/information-notice-5000-881797-fy-2027-7a-program-fees)
- [SOP 50 10 8.1: App. 18, Para. A.2 (p. 395); 13 CFR § 120.214(d)(2)](https://www.ecfr.gov/current/title-13/section-120.214)
- [SOP 50 10 8.1: Sec. A, Ch. 1, Para. D.1 (p. 14); 13 CFR § 121.301(b)(2)](https://www.ecfr.gov/current/title-13/section-121.301)
- [91 FR 53741 (Aug. 20, 2026)](https://www.govinfo.gov/content/pkg/FR-2026-08-20/pdf/2026-17042.pdf)
- [13 CFR § 121.201](https://www.ecfr.gov/current/title-13/section-121.201)